Instructions to Authors

• About the journal
• How we publish
• Peer review process
• Publication and research ethics
• Availibility of data and materials
• Self archiving policy
• Submission
• Manuscript Preparation: Format, Structure, and Style
• Publishing Agreement and charges
• Changes to published papers
• Promoting your work
• Additional author resources

About the Journal

Exposome seeks to publish cutting edge research that contributes and extends our understanding of the human exposome, which can be defined as all the exposures of an individual in a lifetime, the biological manifestations of those exposures, and how the exposures and effects relate to health.

How we publish

Exposome is a peer-reviewed fully open access journal publishing one continuous publication volume per year online.

All papers published in Exposome are made freely available online under an open access publishing agreement, with applicable charges. Please refer to the Open access charges section.

Once a paper is accepted and the publishing agreement is signed, the journal will publish the Accepted Manuscript version of the paper (before copyediting and review of the final proof) within one week on the Advance Articles page. The Accepted Manuscript will be removed from Advance Articles when the Version of Record of the paper (after copyediting and proof review process) is published in the current continuous publication volume. Substantial changes to the published Accepted Manuscript may require a correction notice. The Version of Record requires a correction notice for any changes after it is published. See the definitions of the Version of Record and other versions of the paper for more details.

Peer review process

Exposome operates single-anonymized peer review, meaning that the identity of the authors is known to the editors and to the reviewers, but that the reviewers’ identities are known only to the editors and are hidden from the authors.

Once a submitted manuscript passes initial assessment by the journal’s Editor-in-Chief, it will then be passed to a handling editor to undergo peer review before recommending a final decision. The Editor-in-Chief makes the final decision on the submitted manuscript.

During the peer review phase, your manuscript is typically sent to at least two reviewers. You may suggest potential reviewers at submission. However, there is no guarantee the suggested reviewers will be selected by the journal’s Editors.

Further details about the peer review process are available.

Appeals and complaints

Authors may appeal an editorial decision. To do so, please contact the editorial office (exposome.editorialoffice@technicaeditorial.com), providing as much specific detail as possible about why the original decision should be reconsidered. Every appeal will receive a response within a reasonable timeframe. Please do not resubmit your manuscript in the interim.

To register a complaint regarding non-editorial decisions, the Journal’s policies and procedures, editors, or staff, please contact Journals.Ethics@oup.com. Complaints will be taken seriously and will be carried forward following COPE guidelines and processes.

Publication and research ethics

Authorship

Authorship is confined to those who have made a significant contribution to the design and execution of the work described. Any contributors whose participation does not meet the criteria for authorship should be acknowledged but not listed as an author. For a detailed definition of authorship, please see the International Committee of Medical Journal Editors (ICMJE) definitions of authors and contributors.

The Journal does not allow ghost authorship, where an unnamed author prepares the article with no credit, or guest/gift authorship, where an author who made little or no contribution is listed as an author. The Journal follows Committee on Publication Ethics (COPE) guidance on investigating and resolving these cases. For more information, please see the OUP Publication Ethics page.

After manuscript submission, no authorship changes (including the authorship list, author order, and who is designated as the corresponding author) should be made without the approval of the editor. All co-authors must agree on the change(s), and neither the Journal nor the publisher mediates such disputes. If individuals cannot agree on the authorship of a submitted manuscript, contact the editorial office (exposome.editorialoffice@technicaeditorial.com). The dispute must be resolved among the individuals and their institution(s) before the manuscript can be accepted for publication. If an authorship dispute or change arises after a paper is accepted, contact OUP’s Author Support team. COPE provides guidance for authors on resolving authorship disputes.

ORCID

Submitting authors are required to provide an ORCID iD (Open Researcher and Contributor ID) at submission.

If you do not already have an ORCID iD, you can register for free via the ORCID website.

As ORCID identifiers are collected, they are included in papers and displayed online, both in the HTML and PDF versions of the publication, in compliance with recommended practice issued by ORCID.

ORCID functionality online allows users to link to the ORCID website to view an author’s profile and list of publications. ORCID iDs are displayed on web pages and are sent downstream to third parties in data feeds, where supported.

If you have registered with ORCID, you can associate your ORCID iD with your submission system account by going to your account details, entering your ORCID iD, and validating your details. Learn more about ORCID and how to link it to your account.

CRediT

The Journal uses the contributor roles taxonomy (CRediT), which allows authors to describe the contributor roles in a standardized, transparent, and accurate way. Authors should choose from the contributor roles outlined on the CRediT website and supply this information upon submission. You may choose multiple contributor roles per author. Any other individuals who do not meet authorship criteria and made less substantive contributions should be listed in your manuscript as non-author contributors with their contributions clearly described. Following manuscript submission, any changes to contributor roles require the approval of the editor.

Disclosure of potential conflicts of interest

Authors

Exposome requires all authors to disclose any potential conflict of interest at the point of submission. It is the responsibility of the corresponding author to ensure that conflicts of interest of all authors are declared to the journal.

A conflict of interest exists when the position, activities, or relationships of an individual, whether direct or indirect, financial or non-financial, could influence or be seen to influence the opinions or activities of the individual. For more information, refer to OUP’s definition of conflict of interest.

The Journal follows the COPE guidance for any undisclosed conflict of interest that emerges during peer review, production, or after publication.

Peer reviewers

Individuals that have a conflict of interest relating to a submitted manuscript should recuse themselves and will not be assigned to oversee, handle, or peer review the manuscript.

If during peer review an editor, reviewer, or author becomes aware of a conflict of interest that was not previously known or disclosed they must inform the Editor-in-Chief immediately.

Editors and editorial board members

At initial submission, the corresponding author must declare if the Editor-in-Chief, an Editor, or an Editorial Board Member of the Journal is an author of or contributor to the manuscript. Another Editor without a conflict of interest will oversee the peer review and decision-making process. If accepted, a statement will be published in the paper describing how the manuscript was handled.

Previously published material

You should only submit your manuscript(s) to Exposome if:

• It is original work by you and your co-author(s).
• It is not under consideration, in peer review, or accepted for publication in any other publication (preprint servers excepted).
• It has not been published in any other publication.
• It contains nothing abusive, defamatory, derogatory, obscene, fraudulent, or illegal.

The submitting author must disclose in their cover letter and provide copies of all related or similar preprints, dissertations, manuscripts, published papers, and reports by the same authors (i.e., those containing substantially similar content or using the same, similar, or a subset of data) that have been previously published or posted electronically or are under consideration elsewhere at the time of manuscript submission. You must also provide a concise explanation of how the submitted manuscript differs from these related manuscripts and papers. All related previously published papers should be cited as references and described in the submitted manuscript.

For previously published materials including tables and figures, please see the Reusing copyrighted materials section.

Preprints

As an author, you retain the right to make an Author’s Original Version (preprint) available through various channels and this does not prevent submission to the Journal. If accepted, the authors are required to update the status of any preprint, including adding your published paper’s DOI. For full details on allowed channels and updating your preprint, please see our Author self-archiving policy.

Reusing copyrighted material

As an author, you must obtain permission for any material used within your manuscript for which you are not the rightsholder, including quotations, tables, figures, or images. In seeking permissions for published materials, first contact the publisher rather than the author. For unpublished materials, start by contacting the creator. Copies of each grant of permission should be provided to the editorial office of the Journal. The permissions agreement must include the following:

• nonexclusive rights to reproduce the material in your paper in Exposome
• rights for use in electronic format at a minimum, and preferably for use in any form or medium
• lifetime rights to use the material
• worldwide English-language rights

If you have not obtained open access re-use permissions for third-party material contained within the manuscript, this must be stated clearly by supplying a credit line alongside the material with the following information:

• Title of content
• Author, Original publication, year of original publication, by permission of [rightsholder]
• This image/content is not covered by the terms of the Creative Commons license of this publication. For permission to reuse, please contact the rights holder.

Misconduct

Authors should observe high standards with respect to research integrity and publication ethics as set out by the Committee on Publication Ethics (COPE). Falsification or fabrication of data including inappropriate image manipulation, plagiarism, including duplicate publication of the author's own work without proper citation, and misappropriation of work are all unacceptable practices.  Allegations of ethical misconduct, both directly and through social media, are treated seriously and will be investigated in accordance with the relevant COPE guidance.

If misconduct has been established beyond reasonable doubt, this may result in one or more of the following outcomes, among others:

• If a submitted manuscript is still under consideration, it may be rejected and returned to the author.
• If a paper has already been published online, depending on the nature and severity of the infraction, either a correction notice will be published and linked to the paper, or retraction of the paper will occur, following the COPE Retraction Guidelines.
• The relevant party’s institution(s) and/or other journals may be informed.

Manuscripts submitted to Exposome may be screened with plagiarism-detection software. Any manuscript may be screened, especially if there is reason to suppose that part or all the of the manuscript has been previously published.

COPE defines plagiarism as “when somebody presents the work of others (data, words or theories) as if they were their own and without proper acknowledgment.”

COPE defines redundant/overlapping publication as “when a published work (or substantial sections from a published work) is/are published more than once (in the same or another language) without adequate acknowledgment of the source/cross-referencing/justification,
or
when the same (or substantially overlapping) data is presented in more than one publication without adequate cross-referencing/justification, particularly when this is done in such a way that reviewers/readers are unlikely to realise that most or all the findings have been published before.”

COPE defines citation manipulation as “behaviours intended to inflate citation counts for personal gain, such as: excessive self-citation of an authors’ own work, excessive citation to the journal publishing the citing article, and excessive citation between journals in a coordinated manner.”

Data fabrication is defined as intentionally creating fake data or misrepresenting research results. An example includes making up data sets.

Data falsification is defined as manipulating research data with the purpose of intentionally giving a false representation. This can apply to images, research materials, equipment, or processes. Examples include cropping of gels/images to change context and omission of selected data.

If notified of a potential breach of research misconduct or publication ethics, the Journal editor and editorial office staff may inform OUP and/or the author’s institutional affiliation(s).

Ethical research

The Journal follows Committee on Publication Ethics (COPE) guidelines on ethical oversight.  We take research integrity seriously, and all research published in the Journal must have been conducted in a fair and ethical manner. Wherever appropriate, the Journal requires that all research be done according to international and local guidelines.

Human subjects

When reporting on human subjects, you should indicate whether the procedures followed were in accordance with the ethical standards of the Helsinki Declaration, which were developed by the World Medical Association. For non-interventional studies, where ethical approval is not required or where a study has been granted an exemption by an ethics committee, this should be stated within the manuscript with a full explanation. Otherwise, manuscripts must include a statement in the Methods section that the research was performed after approval by a local ethics committee, institutional review board and/or local licensing committee, or that such approval was not required. The name of the authorizing body and any reference/permit numbers (where available) should also be stated there. Please be prepared to provide further information to the editorial office upon request.

Human subjects must give written informed consent, or if they are minors or incapacitated, such consent must be obtained from their parents or guardians. Consent forms should cover not only study participation but also the publication of the data collected. Also, any patient or provider information should be anonymized to the extent possible; names and ID numbers should not be used in the text and must be removed from any images (X-rays, photographs, etc.). Please note blanking out an individual’s eyes in a photograph is not an effective way to conceal their identity. In studies where verbal, rather than written, informed consent was obtained, this must be explained and stated within the manuscript. If informed consent is not required or where a study has been granted an exemption, this must be included in the Methods section along with the name of the authorizing body. Please be prepared to provide written consent forms signed by the participants or other appropriate documentation to the editorial office upon request.

Clinical trials

Clinical trials should be registered before enrollment of the first subject in accordance with the criteria outlined by the International Committee of Medical Journal Editors (ICMJE). When reporting primary or secondary analyses from a clinical trial, follow these criteria:

• Provide the trial registration number at the end of the Abstract.
• When the trial acronym is first used in the manuscript, provide the registration number and a link to the trial registration, which should be cited as a reference.
• If your data have been deposited in a public repository and/or are being used in a secondary analysis, please state at the end of the Abstract the unique, persistent data set identifier, and repository name and number.
• When submitting the manuscript, you must disclose any protocol alterations and all posting of results of the submitted work or closely related work in registries.

Where available, registration numbers should be provided not only for the trial you are reporting but also for any other trial mentioned in the manuscript. When the trial acronym is first used in the manuscript, provide the registration number and a link to the trial registration, which should be cited as a reference. 

Animal subjects

Studies involving animals require approval from the relevant institutional ethics committee or institutional animal use and care committee, and the research must be conducted in accordance with applicable national and international guidelines. All such manuscripts must include a statement in the Methods section providing details of the name of the committee(s) that approved the study, as well as the permit or animal license numbers where available. Where a study has been granted an exemption, this must be stated in the Methods section along with the name of the authorizing body. Please be prepared to provide further information to the editorial office upon request.

ARRIVE guidelines

You are encouraged to consult the ARRIVE guidelines recommended by the National Centre for the Replacement, Refinement and Reduction of Animals in Research (NC3R).

Euthanasia or Anesthesia Methods

Where applicable, any euthanasia or anesthesia methods must be carried out in accordance with applicable veterinary guidelines. These methods must be described in detail in the manuscript.

Laboratory Animals

Manuscripts describing research involving laboratory-based animals must include details on housing, husbandry, and steps taken to reduce suffering. In studies where experimental animals were euthanized, details must be provided on humane endpoints. Details on the planned behavioral observations or physiological measurements used to determine the humane endpoint must be described. You are advised to consult the NC3Rs guide on Humane Endpoints and the American Veterinary Medical Association (AVMA) Guidelines for the Humane Slaughter of Animals.

Availability of data and materials

Where ethically feasible, Exposome strongly encourages authors to make all data and software code on which the conclusions of the paper rely available to readers. Authors are required to include a data availability statement in their paper. When data and software underlying the research article are available in an online source, authors should include a full citation in their reference list. For details of the minimum information to be included in data and software citations see the OUP guidance on citing research data and software.

Whenever possible, data should be presented in the main manuscript or additional supporting files or deposited in a public repository. Visit OUP’s Research data page for information on general repositories for all data types, and resources for selecting repositories by subject area.

Data availability statement

The inclusion of a data availability statement is a requirement for papers published in the journal. Data availability statements provide a standardized format for readers to understand the availability of original and third-party data underlying the research results described in the paper. The statement should describe and provide means of access, where possible, by linking to the data or providing the required unique identifier.

More information and example data availability statements.

Self-Archiving Policy

You may self-archive versions of your work on your own webpages, on institutional webpages, and in other repositories. If you want more information about the reuse rights you retain if you publish with us, please visit our Author Self-Archiving Policy page.

Submission

Exposome will consider your manuscript as long as it meets the journal’s criteria for original work and ethical standards.

How to Submit

You must submit your paper via our web-based submission system. If you have not published with Exposome before, you will need to create an account. More information is available on the ScholarOne Manuscripts FAQ and help page. Questions about submitting can be sent to the editorial office at exposome.editorialoffice@technicaeditorial.com.

Authorship

Please refer to the publication ethics section for guidance on authorship criteria.

Article Types

This journal publishes several different types of articles including primary research articles, reviews, and commentary or perspective articles.

Guidelines for Original Articles

• abstract—suggested maximum word count: 250
• introduction—suggested maximum word count: 750
• discussion—suggested maximum word count: 1500
• keywords—maximum keywords: 6. Each keyword can be a maximum of 15 words.
• references—maximum references: 60
• tables and figures—maximum of 8 figures and 6 tables

Each submission must contain the following sections: introduction, methods, results, and discussion.

Third-Party Permissions

If you wish to reproduce any material for which you do not own the copyright you must obtain permission from the copyright holder. See the Reusing copyrighted material section for detailed instructions.

Further information on obtaining permissions.

Manuscript Preparation: Format, Structure, and Style

Presubmission Language Editing

If you are not confident in the quality of your English, you may wish to use a language-editing service to ensure that editors and reviewers understand your paper. Language editing is optional and does not guarantee that your manuscript will be accepted. Edited manuscripts will still undergo peer review by the journal.

Title Page

Please include the following:

• the title of your paper
• all author names and affiliations, using this format: department, institution, city, state, country
• mailing address and email address of one corresponding author
• a short running head of 50 characters or less

Abstract

Abstracts have a maximum length of 250 words and must not contain reference citations or abbreviations.

Style

The journal follows AMA style. Please refer to these requirements when preparing your manuscript. More information on the style guide. US spelling should be used throughout, except in quotations and in references.

Abbreviations

Please define nonstandard abbreviations at the first occurrence.

Tables

You must number all tables (e.g., table 1, table 2, table 3) and reference them in the text. You must place all tables at the end of the main text. Tables should be in an editable format, and not embedded as an image file.

References

You may format references in any readable style at submission. You are responsible for the accuracy of reference information. Style files for reference managers.

Acknowledgments and Funding

Acknowledgments and funding information should be included at the end of your manuscript. Please fully cite any relevant funding information, including full funder name and any relevant grant numbers.

LaTeX

Information on LaTeX files and formatting.

Figures

You must include figure titles and legends within the manuscript file—they should not be included in the image file.

You must submit each figure as an individual image file. Submit all panels of a multipanel figure on a single page as one file. For example, if the figure has 3 panels, the figure should be submitted as one file. Each panel should be labeled as a letter (A, B, C, D, etc.) in the upper-left corner of each panel.

Images of photographs or paintings can be provided as raster images. Common examples of raster images are .tif/.tiff, .raw, .gif, and .bmp file types. The resolution of raster files is measured by the number of dots or pixels in a given area, referred to as “dpi” or “ppi.”

• minimum resolution required for printed images or pictures: 350dpi
• minimum resolution for printed line art: 600dpi (complex or finely drawn line art should be 1200dpi)
• minimum resolution for electronic images (i.e., for on-screen viewing): 72dpi

Images of maps, charts, graphs, and diagrams are best rendered digitally as geometric forms called vector graphics. Common file types are .eps, .ai, and .pdf. Vector images use mathematical relationships between points and the lines connecting them to describe an image. These file types do not use pixels; therefore resolution does not apply to vector images.

Figures prepared as .doc/.docx or .jpeg/.jpg files will not be accepted.

Figure accessibility and alt text

Incorporating alt text (alternative text) when submitting your paper helps to foster inclusivity and accessibility. Good alt text ensures that individuals with visual impairments or those using screen readers can comprehend the content and context of your figures. The aim of alt text is to provide concise and informative descriptions of your figure so that all readers have access to the same level of information and understanding, and that all can engage with and benefit from the visual elements integral to scholarly content. Including alt text demonstrates a commitment to accessibility and enhances the overall impact and reach of your work.  

Alt text is applicable to all images, figures, illustrations, and photographs. 

Alt text is only accessible via e-reader and so it won’t appear as part of the typeset article. 

Detailed guidance on how to draft and submit alt text. 

Supplementary Material

You must submit supplementary data or supplementary material at the same time as the main manuscript.

• Supplementary material must be cited in the text of the main manuscript.
• Supplementary material will be available online only and will not be copyedited or typeset.
• Style and formatting of supplementary material should be consistent with that of the manuscript.
• Supplementary material should be formatted to function on any internet browser.
• Supplementary material files should be no larger than 2MB each.

Publishing agreement and charges 

Publishing agreement

Exposome is fully open access, meaning all papers in the Journal are published under an open access licence. After your manuscript is accepted, you will be asked to sign a licence to publish through the Journals Licencing and Online Payments portal. The corresponding author will need to arrange payment of an open access charge to publish in the Journal. This charge allows all published papers to be immediately and freely available to all readers immediately upon online publication. Editorial decisions occur prior to this step and are not influenced by payment or ability to pay.

Papers can be published under the following:

• Creative Commons Attribution licence (CC BY)
• Creative Commons Attribution Non-Commercial licence (CC BY-NC)

Please see the OUP guidance on Licences, copyright, and re-use rights for more information regarding these publishing agreement options.

Complying with funder mandates

Please note that some funders require open access publication as a condition of funding. If you are unsure whether you are required to publish open access, please do clarify any such requirements with your funder or institution before selecting your licence.

Further information on funder mandates and direct links to a range of funder policies.

Open access charges

Charges for CC BY/CC BY-NC: $2100

OUP has a growing number of open access agreements with institutions and consortia, which provide funding for open access publishing (also known as Read and Publish agreements). This means corresponding authors from participating institutions can publish open access, and the institution may pay the charge. Find out if your institution has an open access agreement.

Corresponding authors based in countries and regions that are part of the developing countries initiative are eligible for a full waiver of publishing fees in our fully open access journals. For further details, please see our APC Waiver Policy.

Changes to published papers

Exposome will only make changes to published papers if the publication record is seriously affected by the academic accuracy of the published information. Changes to a published paper will be accompanied by a formal correction notice linking to and from the original paper.

As needed, we follow the COPE guidelines on retractions.

For more information and details of how to request changes, including for authors who wish to update their name and/or pronouns, please see OUP’s policy on changes to published papers.

Promoting your work

As the author, you are the best advocate for your work, and we encourage you to be involved in promoting your publication. Sharing your ideas and news about your publication with your colleagues and friends could take as little as 15 minutes and will make a real difference in raising the profile of your research.

You can promote your work by:

• Sharing your paper with colleagues and friends. If your paper is published open access, it will always be freely available to all readers, and you can share it without any limitations. Otherwise, use the toll-free link that is emailed to you after publication. It provides permanent, free access to your paper, even if your paper is updated.
• Signing up for an ORCID iD author identifier to distinguish yourself from any other researchers with the same name, create an online profile showcasing all your publications, and increase the visibility of your work.
• Using social media to promote your work. To learn more about self-promotion on social media, see our social media guide for authors.

Find out how Oxford University Press promotes your content.

Additional author resources

For additional information regarding submitting a manuscript, what to expect through the publication process, and guidance on how to promote your published article, please see our Author Resources.